1. In order to make better use of Luyu brand agricultural loader and give full play to the superior performance of agricultural loader, please read the "Instruction Manual" carefully!
2. For the safety of you and others, please be sure to read and strictly abide by the safety rules in the manual!
3. When you need the three-pack service, please show the three-pack service certificate, purchase invoice and product certificate.
4, this voucher one machine one book, lost without compensation, and can not be lending, altered, otherwise it may affect your enjoyment of the normal three-pack service!
Second, the service program
1. You have the right to receive high-quality training at the sales office of Luyu Company. You are obliged to study hard, master correct operation skills, and learn the necessary safety production knowledge.
2. During the busy period, when you need service, you can ask for help from our sales office, or ask the company's after-sales service department for assistance.
3. When you request the three-pack service, please be sure to provide the three-pack service certificate, purchase invoice, and certificate.
4. During the slack season, when you need some services after you have finished the vehicle, please contact the sales office in time to avoid delay.
Third, third package service regulations
Basis for the preparation of this regulation
1. "Responsibility for the Repair, Replacement, and Return of Agricultural Machinery Products"
2. "Product Quality Law of the People's Republic of China"
3. Yantai Dayang Machinery Co., Ltd. after-sales service policy.
The principle of four or three packages
1. Who sells and who serves;
2, can repair and repair, to repair mainly;
3, during the busy period due to quality problems can not be used normally, the repairer is responsible for replacing the general term or parts.
Five or three guarantees
1. The validity period of the three packs of the whole machine: the main part of the three-package period of the agricultural loader is 3 months (based on the purchase invoice date), and it is calculated by 8 hours during the day of work.
Six, three parts and components
1. Normal wear parts, wearing parts, etc. shall not be given three bags. In principle, rubber parts, seals, glass products, various filter elements, fuel oil, lubricating oil, cooling water, copper sleeves, pin shafts, general electrical components and specifications are specified. Other vulnerable and consumable parts are not given three packs.
2. If the tire is found to have tumors, degumming, cracking, etc. during the normal use period, it should first be replaced by the tire manufacturer and replaced according to the degree of use. If the tire is broken, damaged or the inflation pressure is too high, the tire will burst. The phenomenon will not be replaced.
3. The warranty content and duration of the diesel engine, starter motor and generator are implemented in accordance with the regulations of the diesel engine manufacturer.
Calculation of the seven or three package period
1. The three-pack period begins from the date the machine is delivered to the user.
2. For the products purchased by the transfer, enjoy the three-package treatment with the original purchase invoice of the product and the relevant three-package service certificate. The three-pack period is calculated from the original invoice billing date.
3. For those who cannot provide valid voucher to prove the purchase time and the dealer unit, calculate from the date of shipment of the machine.
4, product quality three package range
All the Da Yang brand smashing and baling machine produced by our company will operate, maintain and maintain in strict accordance with the requirements in the product manual during the three-pack period. The technical appraisal of the service station entrusted by Dayang Company is indeed the product quality reason. The damaged parts will be treated in three bags according to the regulations.
8. According to the relevant regulations of the State, the following three conditions shall not be implemented, and appropriate fee maintenance may be implemented.
1. Early wear and failure caused by improper use, repair, maintenance, or use beyond the scope of use specified in the instruction manual.
2. The user may disassemble, adjust, or modify the fault caused by the user's disassembly, adjustment, and modification in the "Instruction Manual".
3, no three-pack service certificate and valid purchase invoice, can not prove the failure of its products within the three-pack period.
4. The product specification model on the three-pack service certificate or invoice does not match the product specification model of the required three-pack, or the certificate (invoice) has been altered.
5. After the failure, the original condition is not maintained, or the seller or the repairer has not obtained the consent, and the self-disposal makes it impossible to make a technical appraisal for the cause of the failure.
6. Find a secondary fault caused by the fault not being processed in time and continued to be used.
7. Loss caused by traffic accidents and work safety accidents caused by unlicensed driving and improper operation.
8, due to the use of unqualified fuel, lubricants, cooling water, and failures caused by the original parts.
9. Damage caused by force majeure.
10. The user who uses the three-package service certificate is deemed to have read the above terms in detail, is familiar with the content, and is willing to bear the consequences and responsibilities caused by the violation of this agreement.